May I ask you a question? I can't slow down to normal approach speed when I'm using the A380 for a course flight. Although I have set normal approach speed in FMC.
A380 cannot be reduced to normal approach speed
-
When I choose long final, it can slow down to 135 kt again.So why is that?
-
May I ask you a question? I can't slow down to normal approach speed when I'm using the A380 for a course flight. Although I have set normal approach speed in FMC.
If you're going too fast, deploy the spoilers; the A380 needs a long approach anyway.
-
If you're going too fast, deploy the spoilers; the A380 needs a long approach anyway.
It is not that there is not enough time for the speed to decrease, but that the PFD indicates that the speed is the stall speed, and the automatic throttle cannot control it to decrease to that speed.
-
Also altitude during descent
-
Confirm the speed with the ENT key? It works for me 🤷
-
No problems landing speed is accepted by the system.
-
I personally don’t use VNAV speed for landing and usually set my own auto throttle speed, but usually when I keep pulling the airspeed knob h the plane starts slowing down. In this case, it would be pushing the knob since it’s VNAV speed. If this doesn’t work, I wold try to talk to Jan or look for any tutorials.
-
I personally don’t use VNAV speed for landing and usually set my own auto throttle speed, but usually when I keep pulling the airspeed knob h the plane starts slowing down. In this case, it would be pushing the knob since it’s VNAV speed. If this doesn’t work, I wold try to talk to Jan or look for any tutorials.
I think he did something small wrong. Sometimes it's just small things that have big consequences. It can also happen in VS mode if the sink rate is too high.
-
I personally don’t use VNAV speed for landing and usually set my own auto throttle speed, but usually when I keep pulling the airspeed knob h the plane starts slowing down. In this case, it would be pushing the knob since it’s VNAV speed. If this doesn’t work, I wold try to talk to Jan or look for any tutorials.I mean, the plane can't be slowed down to the speed I specified because it's protected from stalling.It's the orange line I circled.
-
Just now, I repeated my previous operation again, and it was normal. But I've been in this situation many times before.So this seems to be a bug, sometimes normal, sometimes abnormal.
If it's actually a bug in the simulation, why hasn't more users reported it? I don't believe it. I've never had problems like this with Airbus. I don't know.
-
May I ask you a question? I can't slow down to normal approach speed when I'm using the A380 for a course flight. Although I have set normal approach speed in FMC.
-
I mean, the plane can't be slowed down to the speed I specified because it's protected from stalling.It's the orange line I circled.
It says you’re at full flaps, but the low airspeed thing is preventing you from decelerating to landing speed. I don’t know if this is a bug or anything, but I myself have never experienced this, and I also don’t think this is supposed to happen. You should contact IPACS
-
[…]
That's right, I didn't pay attention to that. How does this value come about?
-
- Offizieller Beitrag
Please check if you entered the correct zero fuel weight and fuel weight. The Airbus does not let you fly slower than VLS (yellow line on the PFD) to prevent a low energy situation. Your approach speed should be at least VLS +5KT.
-
Please check if you entered the correct zero fuel weight and fuel weight. The Airbus does not let you fly slower than VLS (yellow line on the PFD) to prevent a low energy situation. Your approach speed should be at least VLS +5KT.
Is this the page?Then how to set it up.
-
- Offizieller Beitrag
If you start with any preset other than cold and dark these values should already be entered for you. If you note down those values you should enter them after a startup from cold and dark as well. Usually you can also just double tap on a field to set the default values but I'm not sure if they are correct yet. With the next update the weights and speeds of the A380 are completely overhauled and the cheat code with double tap or double click on PC works correctly.
-
If you start with any preset other than cold and dark these values should already be entered for you. If you note down those values you should enter them after a startup from cold and dark as well. Usually you can also just double tap on a field to set the default values but I'm not sure if they are correct yet. With the next update the weights and speeds of the A380 are completely overhauled and the cheat code with double tap or double click on PC works correctly.
thank you
