I created a TOWER VIEW for the spotter point on the fence RW10 of TNCM Princess Juliana Intl Airport:





The solution is an additional (!) airport, which "only" consists of the TOWER VIEW and a HELIPAD for localization. The helipad must be closer to the TOWER VIEW point than the actual airfield TOWER:

In the example, the aircraft flying on is first followed by the SPOTTER CAMERA and then by the official TOWER CAMERA, which I find very cool.
The ZIP file contains the files TAP, TSC and WAD:
- The TAP file is only used to create the two other files TSC and WAD with the "aerofly_fs_4_tap_converter"; in FS 4 it is not needed.
- The TSC and WAD files are the two files required in FS 4.
All three files are in text format and can be changed with an editor. For use elsewhere, only a few data need to be adjusted, which can also be changed directly in the two files TSC and WAD. All three files are designed so that the identical facts are in the same line.
ATTENTION:
In the WAD file, the positions and direction are stored in a different format than in the other two files TAP and TSC. Therefore, the WAD file also contains the instructions for the conversions.